Seceuroglide Sectional Garage Doors - Technical Specification

Manufactured in the UK to exacting standards Seceuroglide sectional garage doors provide excellent user benefits, security and insulation and as such represent excellent value for money. As such if you are planning on buying and installing one of these high quality garage door to your property we strongly advise you read the information below to understand the installation space requirements you will need.

Installation Position

The most common way of installing the Seceuroglide sectional door is inside the garage in an “internal face fixed configuration”. This is where the tracks fix to the back of the opening and the horizontal runners hang from the ceiling.

This method of installing the door will allow the maximum drive through width and height to be achieved however in order to be able to install your new garage door in this manner it is essential the space shown in the options below is available. Where these requirements are not met the doors can still be installed however the sizes etc may have to be modified to suit. In these instances please contact us and we will be happy to discuss your requirement and provide the best solution.

Seceuroglide Sectional Elite Lifting Gear

This type of lifting gear employs side springs mounted to the horizontal rails that will aid the user operating the door.

Available Sizes

• Manufactured in made to measure sizes (in mm increments) up to 3000mm (wide) x 2250mm (high)

Installation Space Required

• Minimum Side Room Required: 45mm (90mm if the guides are to be fully behind the opening).
• Minimum Headroom Required (manual operation): 100mm
• Minimum Headroom Required (electric operation): 130mm
• Drive Through Height (manual operation): Opening height -125mm
• Drive Through Height (electric operation): Opening height - 40mm

Seceuroglide Sectional Compact

Where garages are built with a limited amount of headroom or where the presence of low beams, pipes or lights may pose an issue the Seceuroglide Compact is the option to go for as the springs are mounted at the back of the horizontal tracks therefore take minimal amounts of space.

Available Sizes

• Manufactured in bespoke sizes up to a maximum width of 5000mm and a maximum height of 3000mm.

Installation Space Required

• Side Room Required: 75mm (minimum)
• Headroom Required (manual operation): 70mm (minimum)
• Headroom Required (electric operation): 120mm (minimum)
• Drive Through Height (manual operation): Opening height -125mm
• Drive Through Height (electric operation): Opening height - 125mm

Seceuroglide Sectional Plus

Designed with front mounted torsion springs the Sectional Plus lifting gear is ideal for larger doors where heard room space above the opening is unrestricted.

Available Sizes

Manufactured in made to measure sizes as standard (for no additional charge) up to a maximum width of 5250mm and a maximum height of 3000mm

Installation Space Required

• Side Room Required: 75mm (minimum)
• Headroom Required (manual): 200mm (minimum)
• Headroom Required (electric): 200mm (minimum)
• Drive Through Height (manual): Opening height -125mm
• Drive Through Height (electric): Opening height - 125mm